Filter
Top Products
Fitting the door front
The door front is correctly fitted when:
– the lower lugs on the fixing bracket
rest firmly in the lower slits of the
dishwasher outer door panel,
– the prongs of the fixing bracket lie on
the sprung bolts in the upper corners
of the dishwasher door,
– the recess in the middle of the fixing
bracket fits securely in the T-shaped
opening in the door opener.
^
Open the dishwasher door slightly.
^
Hang the door front so that the lower
lugs of the fixing bracket fit into the
lower slits of the dishwasher outer
door panel, and draw slightly up-
wards.
^
Slide the prongs of the fixing bracket
over the sprung bolts and press into
place.
^
Press the front panel against the door
and downwards, so that the prongs
grip behind the sprung bolts.
Installation
15