Filter
Top Products
,
Please follow the installation in
-
structions carefully.
All electrical work should be carried
out only by a suitably qualified and
competent person, in strict accor
-
dance with national and local safety
regulations.
Ensure power is not supplied to the
appliance while installation work is
being carried out.
This dishwasher is supplied with a
mains cable and moulded plug ready
for connection to an a.c. single phase
supply, (230 -240 V 50 Hz for the UK
and Australia) via a fused plug and suit-
able switched socket which is easily
accessible after installation.
^ The voltage, rated load and fuse rat-
ing are given on the data plate lo-
cated on the right hand side of the
door. Please ensure that these match
the household mains supply.
For extra safety it is advisable to install
a residual current device (RCD), with a
trip current of 30 mA (in accordance
with DIN VDE 0664, VDE 0100 Section
739).
^
Do not connect via an extension lead.
Danger of overheating.
,
If the connection cable is dam
-
aged it must be replaced with a
complete connection box and cable
by a Miele approved service techni
-
cian only.
Important
If this machine is fitted with a
non-rewireable plug (BS 1363) and the
socket outlets are not suitable for the
plug supplied or if the existing plug
needs to be replaced by a new one, the
old plug will need to be cut off and an
appropriate plug fitted. The fuse carrier
and the fuse should be removed from
the old plug and disposed of.
The plug cut from the cable should then
be disposed of and on no account be
inserted into any socket elsewhere in
the house (electric shock hazard).
The fuse cover must be refitted when
changing the fuse, and if the fuse cover
is lost, the plug must not be used until a
suitable replacement is obtained. The
colour of the correct replacement cover
is that of the coloured insert in the base
of the plug, or the colour that is em
-
bossed in words on the base of the
plug (as applicable to the design of
plug fitted).
The correct fuse rating of the replace
-
ment fuses that are ASTA approved to
BS 1362 should be fitted. Replacement
fuse covers may be purchased from
your local electrical supplier or Miele
Service Agent.
Electrical connection
20