Filter
Top Products
6.Adjusting the door springs
The door springs are correctly adjusted
when the door remains stationary when
left open at 45 °.
If the door drops down, then the door
springs need to be tightened.
If it closes then the springs need to be
loosened.
The adjusting screw is located in the
upper front strip at the left hand side of
the dishwasher.
Please note:
If the the door front is too heavy for the
door springs (i.e. the door falls open)
then stronger springs should be fitted.
Please contact your Miele dealer or the
Miele Spare Parts Department for ad-
vice.
^
Half open the dishwasher door.
The door springs are easier to adjust
when the door is only half open than
when it is fully open.
^ Adjust the door spring with a Torx
T20 or a 1 x 5.5 mm screwdriver until
it is correctly balanced:
- Turn clockwise = tighten
- Turn anti-clockwise = loosen.
Installation
18