Filter
Top Products
^
Align the cover plate to the front
edge of the worktop in the middle of
the niche.
If the worktop has a very rounded
edge, pull the cover plate further for-
ward so that the reflector panel is still
visible later on.
^ Use the tacks supplied to nail the
cover plate to the underside of the
worktop.
Worktops with wood or laminate edg-
ing:
Nail the tacks through the holes fur
-
ther back from the edge.
^
Use soapy water to wipe off any ex
-
cess sealant.
^
Press the reflector panel into the
plastic holder in the cover plate.
Installation
7