Filter
Top Products
Before using for the first time
Protective foil
The stainless steel surfaces have a
layer of protective foil to prevent
scratching during transportation.
^
Do not remove this foil until the
appliance has been positioned in its
final location. Start at one of the
upper corners.
Cleaning and care
^
After removing the protective foil,
treat stainless steel surfaces with the
Miele stainless steel conditioning
agent supplied with the appliance
(See "Accessories").
Important. Each time it is used, the
Miele stainless steel conditioning
agent forms a water and dirt
repellent protective coating.
^ Clean the inside of the appliance and
the accessories with lukewarm water
and then dry with a soft cloth.
Operation
A light touch of the finger on the
sensors is all that is required to operate
this appliance.
A keypad tone will sound each time a
sensor is touched. You can deactivate
this, if you wish (see "Selecting further
settings - acoustic signals").
Switching on
As soon as the appliance is connected
to the electrical supply, the t mains
connection symbol appears in the
display.
^
Touch the On/Off sensor.
The mains connection symbol t goes
out and the appliance begins to cool
down.
The sensors for the three selectable
zones will now appear in the control
panel: the upper, middle and lower
wine-conditioning zones. The zone
selected is highlighted in yellow and
the temperature of the selected zone is
shown in the display. When first
switched on the sensors for the zones
and the alarm symbol ; will flash until
the selected temperature is reached.
When the set temperature is reached,
the sensor for the relevant zone lights
up constantly. The alarm symbol ; will
go out as soon as all set temperatures
have been reached.
The interior lighting will come on when
the door is opened.
Switching on and off
18