Filter
Top Products
Demo mode r
The appliance can be demonstrated in
the showroom or at exhibitions in
"Demo mode". In this mode the control
panel and interior lighting are active but
the compressor remains switched off,
so that the appliance does not cool
down.
Switching on demo mode
^ Switch the appliance off using the
On/Off sensor.
The three sensors for the wine zones go
out in the control panel. The
temperature display goes out and the
mains connection symbol t appears in
the display.
^
Place your finger in the position of the
X sensor, and leave it there.
^
At the same time, briefly touch the
On/Off sensor (without letting go of
the X sensor).
^
Leave your finger on the X sensor
until the r symbol appears in the
display.
^
Then release the X sensor.
Demo mode is switched on and the r
symbol appears in the display.
Switching off demo mode
The r symbol is lit up in the display.
^ Touch the settings sensor.
All symbols available for selection
appear in the display and the 0 symbol
flashes.
^
Touch the sensors for setting the
temperature (X or Y), repeatedly until
the r symbol flashes.
^
Touch the OK sensor to confirm the
selection.
The 1 flashes in the display (means:
demo mode is activated), the r symbol
lights up.
Information for dealers
49