Filter
Top Products
^
After cleaning, wipe the interior and
accessories with a damp cloth, and
dry with a soft cloth. Leave the door
open to air the appliance for a short
while.
^
Use Miele stainless steel conditioning
agent (see "Optional accessories") to
clean and care for the stainless steel
surfaces on the inside and outside of
the appliance. Unlike stainless steel
cleaning agents, the conditioning
agent does not contain any abrasive
substances and will gently remove
soiling. Each time it is used, it forms
a water and dirt repellent protective
coating.
^ Make sure you treat the exterior
stainless steel surfaces with Miele
stainless steel conditioning agent
each time you clean them.
This will give them a water and dirt
repellent protective coating and help
prevent re-soiling.
^ Clean the appliance door with a
proprietary glass cleaner.
Ventilation gaps
^
The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner. A build-up
of dust will increase the energy
consumption of the appliance.
Door seal
Do not use any oils or grease on the
door seal as these will cause the
seal to deteriorate and become
porous over time.
^ The door seal should be cleaned
regularly with clean water and then
wiped dry with a soft cloth.
Metal grille at the back of the
appliance
The metal grille at the back of the
appliance (heat exchanger) must be
dusted at least once a year. A build-up
of dust will increase the energy
consumption of the appliance.
When cleaning the grille, make sure
that the pipework and other
components do not get broken or
damaged in any way.
After cleaning
^
Replace all shelves and accessories
in the appliance.
^
Reconnect to the mains and switch
the appliance back on.
^
Place the wine bottles back in the
appliance and close the door.
Cleaning and care
38