Filter
Top Products
Individual settings can be selected for
each of the zones.
^
Touch the sensor for the particular
zone where you would like to select
the settings.
The sensor that has been selected is
highlighted in yellow. You can now
–
set the temperature, and
–
switch on the Dynamic cooling
function.
Please refer to the relevant section for
more information.
If another zone is then selected, the
settings for the previously selected
zone remain unchanged.
Switching off
^
Touch the On/Off sensor.
(If this does not work, the safety lock
is still activated).
The three sensors for the wine zones go
out in the control panel. The
temperature and the mains connection
symbol t appear in the display.
The interior lighting goes out and the
cooling process will be switched off.
Switching off for longer
periods of time
If the appliance is not going to be used
for a longer period of time, e.g. whilst
on holiday:
^ switch the appliance off,
^
disconnect it from the mains,
^
clean the appliance out and
^
leave the door ajar to air the
appliance.
If, during a long absence, the
appliance is switched off but not
cleaned out and the door is left shut,
there is a danger of mould and
odours building up inside the
appliance.
Switching on and off
19