Filter
Top Products
Cooking without the
Con|ctivity 2.0 function
(Manual mode)
The Con|ctivity 2.0 function must not
be activated for this mode.
However, manual operation is
temporarily possible even if the
Con|ctivity 2.0 function is activated
(see "Leaving automatic mode
temporarily").
To switch the fan on s
^
Touch the On/Off sensor s.
The fan will switch on at power level 2.
To select a power level
Depending on the intensity of the
cooking vapours, levels 1 to 3 are
usually sufficient for normal cooking.
^ Select the level you require by
touching the 1, 2 or 3 sensor.
Intensive setting
^
For short periods of cooking food
with intensive vapours and a strong
aroma, e.g. when searing meat, you
may wish to select level IS, the
Intensive setting.
Run-on option "5¢15"
It is advisable to leave the fan running
for a few minutes after cooking has
finished to neutralise any lingering
odours in the air.
The fan can be set to switch off
automatically after 5 or 15 minutes.
^
After cooking has finished, touch the
Run-on option sensor ¢ whilst the
fan is still running
–
Touch once = The fan will switch off
after 5 minutes (5 ¢ will light up).
– Touch twice = The fan will switch off
after 15 minutes (¢15 will light up).
^ If you touch the Run-on sensor ¢
again, the fan remains on (5 ¢15
goes out).
To switch the fan off s
^ Touch the On/Off sensor s to switch
the fan off.
Hob lighting I
The hob lighting can be switched on
and off independently of the fan.
^
Touch the hob lighting sensor I.
Operation (Manual mode)
21