Filter
Top Products
Filter operating hours
counter [
The number of hours the cooker hood
has been in operation is stored in
memory.
The operating hours counters tell you
when the grease filters or charcoal
filters need to be cleaned or replaced.
Grease filter operating hours counter
After 30 hours of operation (or another
time if the operating hours counter has
been altered), the Grease filter sensor
[ will light up.
The grease filters must then be cleaned
and the operating hours counter reset
(see "Cleaning and Care").
Altering the grease filter operating
hours counter
You can set the operating hours
counter to suit the type of cooking you
do.
The operating hours counter is set at
the factory for 30 hours.
Select a shorter time of 20 hours if you
fry a lot.
If you only cook occasionally, we still
recommend 20 hours because grease
which has built up gradually over a long
period of time will harden on the grease
filters and make cleaning more difficult.
If you use very little fat for cooking,
select a longer time of 40 or 50 hours.
To alter the operating time:
^
Touch the On/Off sensor s to switch
the fan off.
^
Touch the Run-on sensor ¢ and the
Grease filter sensor [ at the same
time.
The Grease filter sensor [ and one of
the fan power level sensors 1 to IS will
flash.
Sensors 1 to IS indicate the time set:
Sensor 1 = ...............20hours
Sensor 2 = ...............30hours
Sensor 3 = ...............40hours
Sensor IS =...............50hours
^ Touch the relevant number to select
the time you want.
^ Touch the Grease filter sensor [ to
confirm your selection.
All the indicator lights will go out.
If you do not confirm within 4 minutes,
the cooker hood will automatically
revert to the original setting.
Checking the grease filter operating
hours counter
To check the percentage of time set
already used:
^
Touch the On/Off sensor s to switch
the fan on.
^
Touch and hold the grease filter
sensor [.
Operation (Automatic and manual modes)
23