Filter
Top Products
^
Hang the installation frame on the
four screws h. The holes for the
screws should be on the left when
seen from the front.
^
If using the spacer frame, place the
two covers into the fixing holes.
^
Align the installation frame to the
middle line and secure it with the
screws.
The spacers, which were removed
from the spacer frame at the start,
can be used to align the cooker hood
vertically i.
^
Holding the installation frame
securely, remove the two fixing
screws and extend the installation
frame to its maximum length j.
^
Replace the screws.
Installation
36