Filter
Top Products
,
Disconnect the cooker hood
from the mains supply before
mainentance and care (see
"Warning amnd Safety").
Housing
General
The surfaces and controls are
susceptible to scratches and
abrasion. Please observe the
following cleaning instructions.
^ All external surfaces and controls can
be cleaned using a microfibre cloth
or with warm water and a little
washing-up liquid applied with a well
wrung-out soft sponge or cloth.
^ Wipe the surfaces dry using a soft
cloth.
^ Glass surfaces can be cleaned with a
proprietary cleaning agent for glass.
Avoid:
–
cleaning agents containing soda,
acids, chlorides or solvents,
–
abrasive cleaning agents, e.g.
powder cleaners or cream cleaners,
and abrasive sponges, as well as pot
scourers or sponges which have
been previously used with abrasive
cleaning agents. These will damage
the surface material.
–
sharp metal tools,
–
oven sprays.
Important for appliances with
stainless steel surfaces
Stainless steel surfaces can be cleaned
using Miele's non-abrasive cleaning
agent for stainless steel, following the
instructions on the packaging.
To help prevent re-soiling, Miele
conditioning agent for stainless steel
can also be used. Follow the
instructions on the packaging.
Important for appliances with
lacquered housing
Please follow the information given in
“General notes" earlier in this section. It
is very difficult to clean this type of
surface without causing minor marks to
the surface material.
This can become particularly
noticeable with darker colours and if
there is halogen lighting in the kitchen.
Cleaning and care
26