Filter
Top Products
^
Also clean the now accessible area in the machine where
the waste container sits, thoroughly.
^
Push the waste container fully back into the machine.
Drip tray
There is a sensor in the drip tray which causes a message to
appear in the display when the drip tray is full and needs to
be emptied. Remove the tray and empty and clean it when
this message appears.
However, to avoid a build-up of odours, the drip tray should
be cleaned every day.
After running the last rinse you should leave the drip tray
in position for a while before cleaning it so that you catch
any remaining water from the system.
^ Open the machine door and carefully remove the drip tray
from the machine.
There is a grid in the drip tray. This grid prevents the water
from spilling out of the drip tray when it is being carried.
^ Clean the drip tray and the grid with hot water and a little
washing-up liquid, or in the dishwasher and dry with a
cloth.
Make sure that the metal contact discs at the top of the
drip tray are cleaned and dried properly. These metal
discs send a signal to the machine when the drip tray is
full or if it is not in the machine. The discs will not convey
these messages if they are dirty or damp.
Cleaning and care
53