Filter
Top Products
. . . milk spits out of the jug when making the first froth of
the day.
If the door was opened during the heating up phase,
pressure will have built up in the steam valve. When the valve
was opened, this pressure caused the milk to come out of the
spout too fast.
. . . the milk-frothing process starts, stops and starts
again.
This is not a fault. The process ensures a perfect froth.
. . . the slide control for the grinder setting will not move.
^
Close the machine door and dispense a cup of espresso
coffee.
The grinder setting slide control will now move.
. . . the brew unit cannot be removed.
The brew unit is not in the correct position.
^ Close the door and switch the appliance on.
The brew unit will position itself correctly.
. . . the fault message 73 or "Please check brew unit"
appears in the display.
The brew unit is possibly dirty and cannot be positioned
correctly.
^
Touch the "+ C" sensor.
^
Take the brew unit out of the machine and clean it
thoroughly (see "Cleaning and care - Brew unit").
^
Replace the brew unit in the machine and close the door.
If this fault message still continues to appear in the display,
please call the Miele Service department, quoting the fault
code.
Problem solving guide
75