Filter
Top Products
DA 326-1 i
1) The slot for the active charcoal filter
must be accessible if the hood is being
used in recirculation mode.
2) The rear panel of the cabinet may
have to be removed for these
dimensions to be applicable. (See
built-in depth of the upper cabinet).
3) DFB light shield
(optional accessory)
DA 329-1 i *
To ensure that the exhaust ducting can
be installed on the exhaust connection
easily, the upper cabinet must be at
least 18
1
/
8
" (460 mm) high.
*The DA 329-1 i can also be built into a
23
5
/
8
" (60 cm) cabinet. (See upper
cabinet measures for DA 326-1 i). In
this case, the lower portion of the hood
will overlap the bottom cabinets on
either side.
Appliance dimensions
24