Filter
Top Products
3. Runners
^ Cabinet width 60 cm:
Install the runners on the left and
right side of the cabinet with (4)
3.5 x 16 mm screws on each side.
If the side panels are
5
/
8
" (16 mm)
thick, use the bracket side with the
marker "16 mm".
If the side panels are
3
/
4
" (19 mm)
thick, turn the bracket and use the
side with the marker "19 mm".
Note: Please refer to the "Special
installation instructions" at the end of
this section for instructions on installing
the appliance into a 27
9
/
16
" (70 cm) or
35
7
/
16
" (90 cm) wide cabinet.
The measure "x" will depend on the
type of lightshield used.
The Miele DFB lightshield (optional
accessory) sits flush with the cabinet
front.
The runner’s adjustable range allows
the hood position to be adjusted by
±
9
/
16
" (15 mm).
Hood installed with a cabinet
matching light shield (custom made)
Installation
31