Filter
Top Products
Connection for recirculation mode
^ The exhaust grill b must be fitted in
the top of the unit.
If the front of the hood is installed at
ceiling height then a cut-out must be
made in the front panel.
When installing the ventilation grill
make sure that the slats in the grill
point towards the center of the room
and not towards a wall or the ceiling.
^
The vent connection (vent socket) a
and the exhaust grill b must be
joined together with a pipe or flexible
duct c cut to size.
^
Install the Active Charcoal Filter (see
"Cleaning and care").
14. Electrical connection
Refer to the notes in "Electrical
connection" and "Important Safety
Instructions" before connecting to
electricity.
^ Plug in the power cord.
Installation
38