Filter
Top Products
7. Installation of a lightshield
DFB lightshield (optional accessory)
Follow the installation instructions
supplied with the DFB lightshield. Use
the screws supplied with the lightshield.
Custom made lightshield
^
Fit the deflector plate handle into the
openings on the deflector plate.
^
Secure the handle in place with the 2
screws (3.0 x 15 mm) through the
underside of the deflector plate.
^ Stick the three lengths of double
sided tape to the custom lightshield
and stick it to the deflector plate
handle as shown above.
^
Dismantle the deflector plate handle
with the attached lightshield.
^
Secure the lightshield to the deflector
plate handle using (5) 3.0 x 15 mm
screws, two at either side and one in
the middle.
^
Reattach the lightshield to the
deflector plate.
Installation
33