Filter
Top Products
Setting the water softener
Switch the machine off.
Turn the programme selector to f
“STOP”.
Press 4 and 6 at the same time,
hold them in and whilst doing so
switch on the machine with the I-0
main switch.
The actual programme status “P...”
appears in the display.
The p / 6 indicator light illuminates.
Press 3 once. “E01” (programme
level 1) appears in the
display.
Turn the programme selector six
switch positions to the right (6 o’clock
position).
The number “19” appears in the dis-
play (the factory water hardness set-
ting in °d, equivalent to 340 mg/l).
Press 4 as many times as is
necessary, or hold it in until the re-
quired water hardness level appears
in the display.
The counter returns to “0” after
reaching “60”.
Press 6. “SP” is displayed.
Press 6 once more. The setting will
now be saved. The display clears.
The machine is now ready for
operation.
Water softener
15