Filter
Top Products
Cleaning the spray arms
Waste particles can lodge in the spray
arm jets.
The spray arms should be inspected
and cleaned regularly (approx. every
6 months).
Use a sharp pointed object to push
particles into the spray arm jets and
rinse well under running water.
Remove the spray arms as follows:
Unscrew the upper spray arm.
Remove the middle spray arm (on
the top basket)
by unscrewing the
knurled nut.
Important:
The knurled nut has a left-hand
thread, and to unscrew it it must be
turned clockwise with the spray arm.
Take off the lower spray arm.
The lower basket must be removed
first.
Particles in the
lower spray arm are
easier to rinse out if the cap is first
opened.
Open the cap in the direction of the
arrow. After cleaning, close up the
cap again.
Important:
After replacing the spray arms, check
that they move freely.
Cleaning and care
39