Filter
Top Products
3. Delay start and setting the delay
start time
The start of a wash programme can be
delayed by up to 9 hours and 30 minutes
in 30 minute stages.
Note:
Delay start should only be selected
with the Universal and Intensive pro-
grammes. Items in the machine stand
for a longer period before being
cleaned and residues can dry on if the
start time is delayed. Delaying the start
time in shorter programmes can impair
cleaning results.
a) To activate delay start
Turn the programme selector to the f
“STOP” position.
Switch off the machine.
Press 4 and 6 at the same time,
hold them in and whilst doing so
switch the machine on with the I-0
button.
The current programme status “P...”
appears in the display.
The p / 6 indicator light comes on.
Press 3 once, “E01” (programming
level 1) appears in the display.
Turn the programme selector to the
8 o’clock position.
“80” or “81” appears in the display.
“80” = Delay start not selected.
“81” = Delay start activated.
Press 4 to change from “80” to
“81” or vice versa.
Press 6. “SP” appears in the display.
Press 6 again. The change has
been recorded.
Value set:
b) Setting the delay start period
The delay start period (from 30 minutes
to 9 hours and 30 minutes) must be set
before a programme is started.
After selecting a programme (see
“Switching on”), press the 4 button
or hold it in until the required value is
displayed. The “Delay Start” indica-
tor light comes on.
After the “Start” button 6 is pressed,
the delay start period will count down in
the display until the programme auto-
matically starts.
Programming special functions
34