Filter
Top Products
Switching on and offRemoving load
Programme interruption
A wash programme is interrupted as
soon as the door is opened.
If the door is closed again the pro-
gramme will continue from the position
it was at when it was interrupted.
Warning!
Water in the dishwasher may be
hot. Danger of scalding. Only open
the door if absolutely necessary
and exercise caution when doing
so. Hold the door for about 20 secs
in the nearly closed position, before
pushing it firmly shut.
Programme change
A programme change can be made at
any time. The newly chosen pro-
gramme starts as soon as it has been
selected.
Turn the programme selector switch
to the required programme.
If a programme needs to be started
from the beginning again:
Turn the programme selector switch
to the “STOP” position (a point ap-
pears in the display field).
Select a new programme and press
“START”.
Removing load
Hot crockery will chip and break
more easily.
After switching off let it cool down in
the dishwasher until it is comfortable
enough to handle, before you unload
it.
If you open the door fully after switch-
ing off, the crockery will cool down
much faster.
First unload the bottom basket, then
the upper basket and then the cut-
lery tray (if you have one) at the very
end.
This way you avoid water droplets
from the upper basket or the cutlery
tray falling on to crockery in the bot-
tom basket.
Switching on and off
36