Filter
Top Products
Installation integrated “i” Dishwashers
3. Fitting the facia panel
The facia panel is delivered separately
in the colour ordered with the necess-
ary accessories.
It has to be fitted to the dishwasher
when it is being installed.
Place the seal supplied b in the
groove round the ventilation grille
c.
Push the ventilation grille c into posi-
tion.
Attach caps d to the push button
switches.
Fit the adapter disc e .
Place the facia panel f in position
and screw into place from the inside
using the six screws
g.
Attach the switch knob h.
Only applicable when using the GDU
decor set (to convert an "i" version to a
built-under "U" version)
If the GDU decor set is being used, the
adapter strips
i must first of all be
removed, and stored for possible use
in the future. See also the separate in-
structions for fitting the GDU decor set.
Press out the adapter strips from the
fitting slits in the facia panel.
Installation integrated “i” Dishwashers
61