Filter
Top Products
1.Fit worktop protection
A stainless steel “niro” coverplate is
supplied with the machine to protect
the underside of the worktop against
steam rising from the machine.
The coverplate is supplied as standard
with "i" models.
Squeeze sealant from the tube sup-
plied
b into the angle of the “niro”
plate.
Align the "niro" plate c to the front
edge of the worktop - see illustration -
and then use tacks supplied to nail
the “niro” plate to the underside of
the worktop.
On worktops with wood or laminate
edging, the tacks should be nailed
through the holes further back from
the edge.
Installation integrated “i” Dishwashers
57