Filter
Top Products
Laboratory glassware (LG)
Wide-necked glassware, such as wide
necked erlenmeyer flasks and petri
dishes, or glassware with a cylindrical
form, e.g. test tubes, can be cleaned
inside and outside by a rotating spray
arm. General glassware, such as
beakers, conical flasks, petri dishes,
test tubes etc. can be arranged in full
size, half or quarter inserts at the higher
or lower level.
Mobile injector units are available for
direct injection spraying of narrow
necked flasks, pipettes, etc.
The following instructions relate only to
basic preparation and loading of
glassware.
Loading the machine
Removing excess soils
^ Empty all glassware before loading
into the machine.
,
Ensure that no acid or solvent
residues, especially hydrochloric
acid or chlorides get into the wash
cabinet.
^
Remove all agar residues from petri
dishes.
^
Remove blood clots and residues
from test tubes, etc.
^
Remove all stoppers, corks, labels,
sealing wax residues, etc.
^
Small parts - such as stoppers,
faucets and taps - should be secured
in suitable basket inserts.
Note
^
Petri dishes and similar glassware
should be placed in the correct insert
with the soiled side facing the center.
^
Insert pipettes with the pointed end
downwards.
^
Quarter inserts should be placed in
the mobile unit with at least 3 cm
between them and the edge of the
mobile unit.
E 741 Injector mobile unit
With respective modules to clean wide
necked and/or narrow necked
glassware in 1 - 3 levels.
Applications
21