The mobile units and special
inserts should only be used for
their specific application.
Empty any containers or utensils
before arranging them in the
machine.
Do not allow any remains of acids
or solvents, and in particular
hydrochloric acid or chloride solutions
to get into the wash cabinet as well as
corroding ferrous material. Similarly
avoid any materials with a corrosive
effect. The presence in compounds of
any solvents should be minimal,
(especially those in hazard class A1).
Ensure that solutions or steam
containing hydrochloric acid do not
come into contact with the stainless
steel casing of the machine, to avoid
any corrosion damage.
Please follow the installation advice
in these instructions and the
separate Installation Instructions.
Using accessories
Only specific additional equipment
made by Miele should be
connected to this machine. Consult the
Miele Application Specialist on the type
and application of such equipment.
Only Miele mobile units, modules
and inserts should be used. If
equipment from another manufacturer
is used, Miele cannot ensure the
cleaning and disinfection results.
Damage or injury caused by this are
excluded from the warranty.
Disposal of an old appliance
When discarding a lab washer,
disconnect it from the power
supply, and cut off the power cord.
The old appliance may be
contaminated by blood or other body
fluids and must be disinfected before
disposal.
For environmental and safety reasons
ensure the machine is completely
drained of any residue water and
cleaning agent. (Observe safety
regulations and wear safety goggles
and gloves). Make the door lock
inoperative or remove the door
completely, so that children cannot
accidentally shut themselves in. Make
appropriate arrangements for the safe
disposal of the machine.
Machines with tank system, remove the
water from the tank before disposing
the machine.
The manufacturer cannot be held
responsible for any damage caused
by non-observance of these Warning
and Safety instructions.
IMPORTANT SAFETY INSTRUCTIONS
8