Filter
Top Products
The following points should be
observed to assist in maintaining
quality standards, for critical lab
glassware, to protect patients, and to
avoid damage to the loads being
cleaned.
Use only Miele approved cleaning
agents with this machine. Use of
unsuitable cleaning agents could
adversely affect the components of the
machine. Damages resulting from using
unsuitable cleaning agents are not
covered by the warranty.
Pre-treating (e.g. with cleaning
agents), certain soiling and
cleaning agents with a chemical
interaction, can cause foam. For
pre-treatment and / or cleaning only
use low-sudsing detergents which have
been approved by Miele. Suds can
have an adverse effect on the operation
of the machine.
When a chemical additive is
recommended, the manufacturer of
the machine takes no responsibility for
the effect of the chemical on the items
being cleaned.
The machine must only be
operated with water and the
recommended cleaning agents.
Organic solvents must not be used in
the machine, as there is the danger
under certain circumstances of
explosion and damage to rubber and
synthetic materials.
In critical applications where very
high requirements have to be met,
it is strongly recommended that all the
relevant factors for the process, such
as cleaning agent, quality of water etc.
are discussed with the Miele
Applications Specialists.
If the cleaning result is subject to
these particularly stringent
requirements (e.g. chemical analysis,
specialized processes), a regular
quality control test should be carried
out by the user to ensure that required
standards of cleanliness are being
achieved.
IMPORTANT SAFETY INSTRUCTIONS
7