Filter
Top Products
To change or cancel a program
If the "Start" button 6 has already been
pressed:
1. In operating levels B or D
^
Press the "Stop" 7 button (the
program is interrupted).
>CANCEL< OR >CONTINUE<
appears in the display.
^
Select >CANCEL< with the 1 cursor
button. (The cursor > < flashes.)
^
Press the "Start" 6 button (the
program is cancelled and the water
is drained). DRAIN WATER appears
in the display.
^ After the water has been drained the
required program can be selected
and started.
2. In operating levels A or C
Select operating level B or D.
(Note: You will be asked for your code.)
Proceed as follows:
^
Press 1 and 2 at the same time.
Operating levels A B C D will appear
in the display.
^
Select operating level B or D with the
1 or 2 key.
^
Press 6 to confirm selection.
^
Enter your code when requested by
the display.
^ Press the "Start" button 6.
[0000] appears.
^ Enter numbers using the 4 and 3
keys.
^ Select number position with the 1 or
2 key.
^ To confirm code press 6.
If you enter it incorrectly: FALSE CODE,
ENTER AGAIN will appear in the
display.
^
In operating levels B or D proceed as
described under 1.
Operation
30