Filter
Top Products
Filling the containers with the
relevant detergent or neutralizer
^
Turn the lab washer off using the
power switch.
^ Open the service panel on the
bottom right of the machine.
^
Take the storage container out of the
unit, open it and fill with the agent
required. Observe the color code.
^
Insert and secure the siphon tube
into the container. Observe the color
code.
The message clears once the storage
containers have been filled.
Please remember to refill the
containers in a timely manner, they
should not be emptied completely.
If the container is not in use, the refill
function for the dosage system not
used can be shut off and the
respective display message be
avoided (see “Program manual -
Machine function / Dispensing -
Query container").
Adding of liquid detergents and neutralizers
25