Filter
Top Products
Pour liquid rinse aid into the storage
container until it is visible on the sur-
face of the screen. Do not add any
more rinse aid until the H indicator
lamp comes on.
Only use rinse aid specifically
labeled for residential dishwashers.
Inadvertently using powder or liquid
detergents will damage the rinse
aid dispenser.
Close the flap firmly. The flap must
audibly engage, otherwise water
could get into the rinse aid storage
container during the programme.
Wipe up any spilled rinse aid. This
prevents over-foaming occuring
during the next programme.
The flap should remain closed during
normal operation.
Setting the dosage.
The dosage selector comes factory set
to 3. The setting dispenses approxi-
mately 3 ml rinse aid per programme. It
can be adjusted from 1 to 6, depend-
ing on your requirements. It is best to
use the lowest setting that will still give
good results for your water supply.
If spots appear on dry glassware,
use a higher setting.
If streaking appears on dishes or
glasses, use a lower setting.
Adding rinse aid
19