Filter
Top Products
For Corian
®
or granite countertops,
fasten the dishwasher to the adjacent
cabinets using the optional side mount-
ing brackets as shown below.
For openings greater than 23 5/8"
(60 cm) wide:
Pull the dishwasher out from under
the countertop about 4" (10 cm).
Insert the tab of each side mounting
bracket (optional) into the guide hole
on top of the dishwasher, then swing
it to the right or left as required.
Push the dishwasher back into its
opening. Align and fasten it to the ad-
jacent cabinets using 2 screws for
each bracket.
For openings 600 mm (23 5/8") wide:
Open the dishwasher door and
remove the caps covering the mount-
ing holes on the outer edge of the
wash chamber.
Fasten the dishwasher to the ad-
jacent cabinets using the supplied
screws and bushings. Make sure a
bushing is placed over the screw be-
fore inserting it into its mounting hole.
Tighten the screws and replace the
caps.
The side mounting holes should
only be used for securing the
dishwasher if the opening is
600 mm (23 5/8") wide. Use of this
method on larger openings will
damage the machine and cause
leaks.
Dishwasher installation
64