Filter
Top Products
Programme chart
Programme When to use Detergent
containing
chlorine
1)
chlorine
free
2)
Compart-
ment
I
(Pre-
wash)
Compart-
ment
II
(Main
wash)
Compart-
ment
II
(Main
wash)
Normal and Universal programmes
NORMAL
55 °C/130 °F
(Touch pad
f)
for normal everyday loads,
particularly suitable for chlorine-free detergents
100 % 100 %
UNIVERSAL
55 °C/130 °F
(Touch pad
c)
for normal everyday loads 20 % 80 % 100 %
UNIVERSAL
65 °C/150 °F
(Touch pad
b)
as UNIVERSAL 55 °C/130 °F, but with higher wash
temperature for stubborn dried on particles
20 % 80 % 100 %
Special programmes
ECONOMY
55 °C/130 °F
(Touch pad
d
)
for full loads with very light soiling (e.g.
coffee cups), or:
for half a, normal everyday load
50 %
3)
50 %
3)
CHINA & CRYSTAL
45 °C/115 °F
(Touch pad
e)
“Gentle programme”, for lightly soiled and
heat sensitive tableware.
50 %
3)
50 %
3)
The dispensing method will depend on the type of detergent being used:
1) Use this method for:
– detergents which contain phosphates and chlorine.
Divide the total amount, as shown, between compartment I and compartment II.
2) Use this method for:
– detergent which is chlorine and phosphate free.
– detergent which is chlorine free but contains phosphates.
In this instance the whole amount is placed in compartment II.
3) Use half of the manufacturer’s recommended amount of detergent.
Programme chart
28