Filter
Top Products
Time display (19)
When the “Time left” indicator is on, the
display is showing the time remaining
in the wash program.
When starting a program, the “Time
left” can vary, even if the identical pro-
gram has been run before.
The calculated time is partially depend-
ent on the temperature of the intake
water. When the dishwasher is turned
on for the first time, the time shown as-
sumes an intake temperature of 60 °F
(15 °C).
For each subsequent program, the ac-
tual temperature of the previous pro-
grams intake water is used in the “Time
left” calculation. Due to this continuous
updating, the “Time left” can vary, even
for the same program.
End of a program
When a program is finished, all the se-
quence indicator lamps (15) will be off,
and “0” will be shown in the time dis-
play.
The program indicator lamp (17) and
the lamps for any additional features se-
lected (e.g. Top Solo) will remain lit until
the door is opened.
The dishwasher can be unloaded as
soon as the “0” appears in the display
(see Unloading the Dishwasher).
If the dishes are not needed immediate-
ly however, leaving the door closed
while “0” is displayed will allow the fan
to run for a few more minutes and en-
sure thorough drying.
Turning off the dishwasher
At the end of a program:
Press the “ON/OFF” button (16).
If the dishwasher is not to be used for
an extended period (e.g. while on vaca-
tion), it is recommended that the water
supply valve be shut off.
Your Miele dishwasher is designed to
shut off the water flow and drain the
machine in the rare event of a valve
failure. In order for this function to be
active, the door must be shut and the
machine must be “ON”.
Operating the dishwasher
33