Filter
Top Products
Microwave mode is combined with one
of the traditional oven functions, (Fan
heat or Grill).
A microwave process can only start
if the door is shut.
Microwave + Fan heat h + D
To use a combination programme you
must first select a microwave power
level and the time for the process.
^
Turn the function selector to the com
-
bination programme :
Microwave + Fan heat h + D.
The cooling fan starts up.
The display will show a suggested
power level of 300 W.
If this power level is not suitable alter it
using the + or – button.
The following power levels can be se
-
lected:
80 W, 150 W, 300 W, 450 W.
To enter the time:
^
Press the g button.
0•00 appears in the display for
approx. 4 seconds .
^
Within these 4 seconds set the re
-
quired time using the + or – button.
You can enter a maximum of 99 min
-
utes 59 seconds.
With power level 450 W a maximum of
60 minutes can be entered.
The time entered appears in the display
in minutes•seconds. The c and AUTO
symbols flash.
^ With the temperature selector choose
a temperature for the Fan heat func-
tion.
Only turn the temperature selector
clockwise and then back again anti-
clockwise. Do not force it past the
resistance. Otherwise it could be
damaged.
^
Press the Start/Stop button.
The oven interior light comes on. The
microwave function starts and the oven
begins to heat. The indicator light on
the control panel stays alight while the
oven is heating up.
Using combination programmes
27