Filter
Top Products
Before starting a process
If you discover before the start of a pro
-
cess that you have made an error with
the data entry then this can be cor
-
rected.
Changing a time entry
^
Press the g button to activate the
time function.
^
Press the + or – button to enter a new
time.
^
Press the Start/Stop button to start
the process.
Changing the microwave power level
^ Press the h button to activate the
microwave function.
^ Press the + or – button to enter a new
microwave power level.
^ Press the Start/Stop button to start
the process.
After starting a process
If you discover after the process has
begun that you have made an error with
the data entry, press the Start/Stop but
-
ton to interrupt the process.
The time is halted at the point of inter
-
ruption.
The cooling fan continues to run during
this period.
Correct the time and microwave power
level entry as described in the Section
"Before starting a process".
^ Press the Start/Stop button once
again to re-start the process
Altering entered data
31