Filter
Top Products
Installing the cooker
If an interim shelf is fitted beneath
the oven, a cut-out is required as
close to the unit back wall / the wall
as possible to ensure that there is
sufficient ventilation for the ap-
pliance.
The shape of the cut-out is not
important, as long as cut-out
measures at least 150 cm
2
.
Turn off the mains electricity supply
to the isolator.
Follow connection diagram sup-
plied with the cooker.
Connect cooker cable to isolator.
Align the cooker in front of the base
unit.
Connect the hob plug to the socket
on the cooker.
Push the appliance into the oven
base unit as far as the oven trim and
align.
Then open the oven door and screw
the oven to the side panels of the
base unit through the two holes, one
on each side of the oven trim.
The appliance must only be oper-
ated when it has been built in.
Installing the cooker
74