Filter
Top Products
Installing the oven
If the oven is to be built into a base
unit, a cut-out is required in the in-
terim shelf as close as possible to
the wall or unit back panel to ensure
that there is sufficient ventilation for
the appliance.
The shape of the cut-out is not im-
portant, as long as cut-out
measures at least 150 cm
2
(see
also "Installing the cooker").
Turn off the mains electricity supply
to the isolator.
Connect the oven to the electricity
supply by the isolator.
Place the oven into the oven housing
unit as far as the oven trim and align.
Open the oven door and using two
screws secure the oven to the side
walls of the housing unit through the
holes in the oven trim.
The appliance must only be oper-
ated when it has been built in.
Installing the oven
75