Filter
Top Products
Controls
The oven controls consist of an oven
function selector and a temperature
selector.
Selecting an oven function
The function selector can be turned
clockwise or anti-clockwise.
The following settings are available:
– Light H/v
For switching on the oven light
independently.
This position is also be used for
altering the time display and the
buzzer tone.
–
Microwave h
–
Fan plus Y
–
Grill n
–
Microwave + Grill h n
–
Microwave + Fan plus h Y
Temperature selection
The temperature can be freely selected
within the given range using the
temperature selector.
The temperature selector must only
be turned in a clockwise direction as
far as it will go and then back again.
Do not force it right round in a
clockwise direction as this would
damage the selector.
When the temperature selector is
turned to a temperature setting, the
temperature indicator light on the
control panel will light up. It remains on
whilst the oven is heating up.
When the pre-selected temperature is
reached, the heating element switches
itself off. When the temperature falls
below that selected, the heating
element switches on again
automatically.
The grill temperature is set
automatically and cannot be changed.
The position of the temperature selector
is of no relevance during grilling.
The indicator light on the control panel
stays on while the oven is heating up.
Operation
21