Filter
Top Products
Whilst triangle V is flashing, use the
- or + immediately to make any
changes to the setting selected:
–
The + button increases the value
shown.
–
The - button decreases the value
shown.
Triangle V will flash for approx.
5 seconds.
Settings can only be changed using
the - or + buttons whilst it is flashing.
If this period has elapsed, you will
need to call up the required symbol
again by pressing the V button.
Each press on the - or + button alters
the time for the microwave programmes
in one-second steps, and the time for
all other functions in one-minute steps.
Holding the button pressed in for
longer, speeds up the change in the
display.
Setting the time of day
When the appliance is first
connected to the power supply, or
after a power cut, "I2:00" will flash in
the display.
The time of day can only be entered
if the function selector is at "0".
^
Turn the function selector to "0".
lm
V
^ Press the V button repeatedly until
triangle V is underneath the m
symbol.
^ Whilst triangle V is flashing, use the
- or + button to enter the hour and
confirm by pressing the V button.
The minutes and triangle V will flash.
^
Now enter the minutes with the - or +
button and confirm by pressing the
V button.
As soon as the m symbol goes out, the
time set is saved.
Timer
23