Filter
Top Products
Manual operation
If you do not want to use an Automatic
programme you can enter the settings
for a cooking programme manually.
^
Place the food in the oven.
^
Select the function you want (e.g. Fan
plus U).
The following will appear in the display:
–
Fan plus
–
"160" - the recommended
temperature,
– the words "Heating phase".
At the same time the oven compartment
heating, lighting and cooling fan will
switch on.
The lighting switches off automatically
after approx. 15 seconds. If you wish,
you can set the lighting to be on all the
time, see "Settings - Lighting".
You can follow the temperature rising in
the display. When the set temperature
has been reached, "Heating phase" will
disappear from the display.
^
At the end of the programme, turn the
function selector to "0" and remove
the food from the oven.
^
If you touch the OK sensor during a
cooking programme, the duration,
start time, finish and moisture
reduction options will appear. See
"Operation - Entering duration, start
time or finish" for more information.
Cooling fan
The cooling fan will continue to run for a
while after the oven has been switched
off to prevent any humidity building up
in the oven, on the control panel or on
the oven housing unit.
When the temperature in the oven has
fallen sufficiently, the cooling fan will
switch off automatically.
The cooling fan can be set to switch off
after a specific time, see "Settings -
Cooling fan".
Operation
25