Filter
Top Products
Problem Possible cause and remedy
A fault code
appears in the
display. F + number
–
F54: The food probe is faulty.
The code will go out as soon as the food probe is
removed from the oven.
A replacement can be ordered from your Miele Dealer or
the Miele Spare Parts Department.
–
F55: Safety switch-off has been triggered. The oven has
switched off automatically as it has been operating for an
unusually long time. The length of time depends on the
oven function selected.
The oven will be ready for use again, after it has been
switched off and then back on again.
For all other fault codes please contact the Miele Ser
-
vice Department.
If it is not possible to remedy a fault by following the instructions given above,
contact the Service Department. On no account open the appliance casing.
This appliance should only be repaired by a suitably qualified technician
trained by Miele.
Problem solving guide
52