Filter
Top Products
Entering the duration and delaying
the start or the finish time
You can set the Start time and Finish to
specify when you want cooking to start
or finish.
To switch a programme on and off
automatically you can either:
–
Enter the Duration and Finish time, or
–
Enter the Start time and the Duration.
The time which has not been entered is
calculated automatically.
The Start time will be shown in the
display up until the heating elements
are switched on.
During the course of the programme
you can follow the Time left counting
down in the display.
At the end of the programme the
message "Prog. finished" will appear in
the display and the buzzer will sound.
Changing or deleting an entered
cooking time
^
Touch the OK sensor.
^
Use the ; or ? sensor to highlight
the duration, start time or finish time
and select it with the OK sensor.
^
Use the ; or ? sensor to set the time
to "-:- -".
If there is a power cut, all data entered
will be deleted.
Making use of residual heat
The heating in the oven switches off
shortly before the end of the cooking
programme. The residual heat in the
oven is sufficient to complete the
cooking process.
Using the residual heat in the oven
saves energy.
"Use residual heat" will appear in the
display to show that the oven is in
energy save mode. The current core
temperature of the food will no longer
be shown.
The cooling fan continues to run, as
does the hot air fan if a "fan" setting has
been chosen.
Operation
29