Filter
Top Products
Setting the time of day
You cannot set the time of day while
a cooking programme is in progress.
^
Set the hour with the ; or ? sensor
and confirm your setting with the OK
sensor.
^
Then set the minutes with the ; or ?
sensor and confirm your setting with
the OK sensor.
If there is a power cut, the current time
of day will reappear once power has
been restored. The appliance will store
this data for approx. 200 hours. After
200 hours it will show "0:00" and will
need to be re-set.
Lighting
The oven interior lighting can be set so
that it that it stays on throughout
cooking or goes out 15 seconds after a
cooking programme has started.
If the you have set the lighting to go out
15 seconds after a cooking programme
has started, it will switch on again for 15
seconds when one of the sensors is
touched.
Catalyser
The oven is delivered with the catalyser
engaged for all functions.
If the catalyser is set to:
–
"On"
it will work with all functions.
–
"Off once"
it will not come on during the next
programme.
Cooling fan run-on
The cooling fan will continue to run for a
while after the oven has been switched
off to prevent any humidity building up
in the oven, on the control panel or in
the oven housing unit.
You can set the cooling fan to switch off
either when the temperature in the oven
is below approx. 70°C, or after a period
of approx. 25 minutes.
Do not leave food in the oven to
keep it warm if you have set the
cooling fan to timed operation.
Moisture levels in the oven could
increase, leading to condensation
forming on the control panel and
surrounding kitchen furniture and
drops of moisture collecting under
the worktop.
Condensate can
– damage the housing unit/
worktop.
– lead to corrosion in the oven.
Settings
32