Miele H 5460-BP Oven User Manual


 
Pyrolytic cleaning of the oven
interior
A message will appear in the display
after a certain length of time to remind
you to run a pyrolytic cleaning
programme. You can deactivate this, if
wished (see "Settings - Pyrolytic").
Before starting a pyrolytic cleaning
process please note the following:
Remove any coarse soiling from the
oven before you start.
There is a fibre-glass door seal
around the oven cavity.
This seal is particularly sensitive and
should not be cleaned unless
absolutely necessary. Rubbing can
damage it.
Remove all accessories as well as
the runners and any extra
accessories, such as the FlexiClip
runners, from the oven interior
before starting the pyrolytic cleaning
process. The high temperatures
needed for pyrolysis will damage the
accessories.
The oven door gets much hotter
during pyrolytic operation than
during normal use.
Make sure children cannot touch the
oven whilst a pyrolytic programme is
running. Danger of burning.
During the pyrolytic process the oven is
heated to approx. 460 °C . Any residual
soiling is burnt off by the high
temperatures.
Depending on soiling levels you can
choose between three cleaning
programmes:
Level 1 (Duration approx.
2 hours 15 minutes)
Level 2 (Duration approx.
2 hours 25 minutes)
Level 3 (Duration approx.
2 hours 35 minutes)
For safety reasons the oven door is
automatically locked at the beginning
of the pyrolytic programme.
At the end of the programme it will not
be unlocked until the temperature
inside the oven has dropped to below
280 °C.
If the pyrolitic cleaning programme has
been started by mistake or if the
process is interrupted, the door lock will
be released:
immediately if the temperature is
below 280 °C.
not until the oven interior temperature
is below 280 °C if the temperature
inside the oven is higher than
280 °C.
You can delay the start of the pyrolytic
process for example, to take advantage
of cheaper night electricity tarifs.
Cleaning and care
40