Filter
Top Products
7. Align the control panel
The control panel should be aligned
with the drawer fronts of the adjoining
kitchen cabinets by adjusting the filler
strips.
^ Using an 8 mm socket, turn the nut
clockwise or counterclockwise until
the filler strips line up with the drawer
line.
If necessary, individual or all of the filler
strips can be removed.
^
To remove the filler strips from the
control panel, place the panel printed
side up, and gently push down near
the bottom of the control panel. This
will release the mounting bolts from
their slots.
^
After adjusting the control panel
height, cut off the plastic screw ex
-
cess.
Control Panel Height
4
1
/
2
" control panel with-
(112 mm): out filler strips,
5
3
/
4
" control panel with
(145 mm): four filler strips,
6" using a fifth filler strip
(154 mm): (optional accessory).
Part numbers for additional filler
strips
Color Full size Slimline
white 4 047 341 4 312 770
black 4 047 361 4 312 780
Stainless
Steel
3 280 742
3 298 210
4 316 721
Installation
18