Filter
Top Products
10. Adjust the door springs
^
Open the dishwasher door halfway.
If the door remains in this position when
released, the springs are adjusted cor
-
rectly.
If the door drops, the tension on the
springs needs to be increased.
If it closes on its own, the tension on the
springs need to be decreased.
^
To adjust the door springs use a T20
Torx or a small slotted screwdriver
and turn the screw located behind
the door in the upper front strip, on
the left hand side of the dishwasher.
Do not use a power screwdriver.
– turn clockwise to increase the
tension
– turn counterclockwise to de-
crease the tension.
Note:
If the door springs can not be adjusted
enough (the door falls), the custom
door panel is too heavy.
Call your Miele dealer or Miele’s Techni
-
cal Service Department for advice on
stronger door spings.
Installation
28