Filter
Top Products
^
Carefully
open the dishwasher door
until it hits the toekick.
^ Using the front
lower edge of the
door panel as a guide, draw a line
across the toekick.
^ Unscrew and remove the toekick.
^ If one of the cutting lines is close to
the line just drawn, score the front of
the toekick, and snap off the excess,
otherwise, trim the toekick along the
line using a saw.
^
Screw the toekick back onto the brack
-
ets, with the cut edge at the bottom
.
,
After installation, carefully open
the dishwasher door to check that
the front panel does not hit the
toekick. If it does, remove the
toekick and trim it accordingly.
Installation
39