Filter
Top Products
All fitting instructions given are for a
right hand hinged appliance. If you
have converted the appliance to left
hand hinging you will need to adapt
these instructions accordingly.
To install the appliance you will need
the following:
–
a cross-slotted screwdriver,
–
a selection of Torx screwdrivers,
–
a hexagon spanner.
Weight of the furniture door
Before fitting a furniture door, ensure
that the weight of the door does not
exceed the maximum permitted:
Appliance
Maximum weight of
furniture door in kg
K 9457 iD 19
K 9557 iD 15
K 9757 iD 18
Fitting a door which is heavier than
the maximum permitted could
damage the hinges.
Building into a peninsular run
When built into a peninsular run, the
rear of the building-in niche must be
fitted with a kitchen furniture panel.
Aligning the housing unit
The housing unit must be carefully
aligned using a spirit level before
installing the appliance. The unit
corners must be at right angles, as
otherwise the furniture door will not
align correctly with the 4 corners of the
appliance.
Building in the appliance
41