Filter
Top Products
^ Close the door and align it with
neighbouring furniture doors.
^ Whilst counterholding the adjusting
bolts i with a screwdriver, tighten
nuts h on the appliance door.
^ Cover strip j must be completely
hidden in the niche, and must not
protrude.
^
Tighten all screws again.
^
Secure the appliance again using
screw k through the round hole in
the plastic bracket.
^
Close the plastic bracket.
^ Replace all the covers.
To make sure the appliance is
correctly fitted:
– The door must close properly.
– The door must not touch the furniture
carcase.
– The seal at the top edge of the
handle side must fit properly.
To double check place a torch in the
appliance and close the door. Turn the
lights out in the room. If you can see
any light shining out from the sides
double check the installation.
Building in the appliance
47