Filter
Top Products
Settings mode
Certain settings on the appliance can
only be selected in the settings mode.
How to select the settings mode and
how to change the settings is
described in the relevant section of
these instructions.
Overview of functions that can be
selected in the settings mode:
To enter or leave the settings
mode
c
To switch the sensor tone
on/off
(see "Switching on and off")
b
To confirm that the active
charcoal filters have been
changed (see "Active charcoal
filters")
^
To switch the safety lock on/off
(see "Switching on and off")
u
To change the brightness of
the temperature display
(see "The correct
temperature")
d
To adjust the temperature in
the PerfectFresh zone
(see "The correct
temperature")
§
To set the water intake time for
the ice cube maker
(see "Making ice cubes")
e
The door alarm is automatically
disabled when the appliance is in
the settings mode. As soon as the
door is closed, the door alarm is
activated again.
Switching the sensor tone on/off
The tone which sounds each time a
sensor is touched can be deactivated.
^ Touch and leave your finger on the X
sensor.
^ At the same time, briefly touch the
On/Off sensor (without letting go of
the X sensor).
^
Leave your finger on the X sensor for
another 5 seconds until c appears in
the display.
^
Touch the X sensor repeatedly until b
appears in the display.
^
Touch the On/Off sensor.
^
By touching the X sensor, you can
now select whether the sensor tone is
switched on or off:
b0: Sensor tone is switched off
b1: Sensor tone is switched on
b –: Return to menu
Switching on and off
17